Rework & Torque of Crankshaft, Rear Main Bearing Inner Race Retaining Nut
24-May-1962
No. 13, Rev. A, Ammendment No. 1
|
Instructions for Salvage of Worn Crankshaft Coupling Splines
28-June-1962
No. 55, Amendment 1
|
Identification of Valve Springs
18-July-1962
No. 57, Amendment No. 1
|
Provision for Crankshaft Crankpin Sludge Retaining Plug & Pin Assembly
19-Apr-1962
No. 76. Rev. A
|
Provision of Exhaust Valve Seat, Lipped Type
28-June-1962
No. 79, Amendment No. 1
|
Inspection & Rework of Supercharger Rear Cover Strainer Bore
7-May-1962
No. 82
|
Intake & Exhaust Rocker Arms - Increased Diameter Spotface at Lockscrew
10-Oct-1962
No. 83
|
Crankcase Front Sec. - Incorporation of 1/2 Inch Radius at Zerk Fitting Location
4-June-1962
No. 85
|
Identification of Oil Pump to Supercharger Rear Cover Gasket
28-June-1962
No. 86
|
Provision of Larger Washer, Longer Screw & Application of Silastic Compound
29-June-1962
No. 87
|
Rework of Fluid Power Pump Drive Shaft with Attaching Bolt
6-July-1962
No. 88
|
Time Coding of Exhaust Valves
16-July-1962
No. 89
|
Installation of Oil Sump Plug, Cannon Type Lisle Magnetic Chip Detector
19-July-1962
No. 90
|
Rework to Ensure Clearance of Valve Tapped Guide & 2nd Order Balanceweight
16-Aug-1962
No. 91
|
Provision of Grooved Intermediate Impeller Drive Shaft Bushing
17-Aug-1962
No. 92
|
Provision of Drain Plug Gaskets
20-Sept-1962
No. 93
|
Provision of New Propeller Shaft Coupling
20-Sept-1962
No. 94
|
Salvage of Generator Drive Shaft and Coupling Retaining Circlet
21-Sept-1962
No. 95
|
Supercharger Front Housing - Elimination of Interference with Engine Mount
21-Sept-1962
No. 96
|
Rem. of Inter. Impeller Drive Shaft Fr. Bushing to SprChgr Rear Housing Lock Pin
24-Sept-1962
No. 97
|
Rework of Accessory Drive Shaft and Starter Shaft Thrust Ring
28-Sept-1962
No. 98
|
Replacement of Carburetor Hold-Down Nuts
10-Oct-1962
No. 99
|
Provision of Flash Copper Plating of Crankcase Main Section
15-Oct-1962
No. 100
|
Provision of Wider Oil Slots for Pinion Carrier, Reduction Gear
29-Oct-1962
No. 101
|
Provision of Supercharger Front Housing Mounting Bolt Bushing
16-Nov-1962
No. 102
|
Supercharger Rear Cover Nut - Provision of Self Locking Nut Type
22-Nov-1962
No. 103
|
Lubrication of Engine Accessory Drive ID Splines
28-Nov-1962
No. 106
|
Provision of Improved Elements & Belleville Spring Washer Assembly
4-Dec-1962
No. 107
|
Provision of Pre-Oil Check Valve
2-May-1963
No. 110
|
Cylinder Barrel Flange - Breakages at Hold-Down Capscrew Holes
2-May-1963
No. 111
|
